Login
Templates, Tools and Utilities
for Clarion Developers
Templates, Tools and Utilities
|
||
|
|
|
Add a comment to an Icetips ArticlePlease add your comments to this article.
Please note that you must provide both a name and a valid email address in order
for us to publish your comment. Comments are moderated and are not visible until they have been approved. Spam is never approved!
Back to article list Search Articles Add Comment Printer friendly Direct link Par2: Hex to decimal conversion 1999-01-31 -- Eric Churton This question has often come up. If one understands what one is trying to do, then it
becomes possible to work out one or more solutions. Hopefully the following observations
will help somebody.
Bear in mind that there are lots of different (and probably better) ways of doing these
conversions (usually involving arrays), but I have worked these methods out so that
they are reasonable easy to understand, improve on and duplicate. In computer
programming skinning a cat is often done in a hurry, so one tends to use the first method
one thinks of!
1. Converting Decimal to Hex
Lets compare decimal with hexadecimal. Decimal numbers are represented by
10 possible characters: 0123456789, anytime 9 is exceeded you bump up a 1 on
the left and make '9' '0' - thus 9 + 1 becomes 10 and 99 + 1 becomes 100.
Hexadecimal numbers are represented by 16 possible characters 0123456789ABCDEF,
in this instance when F is exceeded you bump up 1 on the left and turn the F into 0. A
represents decimal 10, B represents decimal 11 etc - thus F + 1 becomes 10 and FF + 1
becomes 100 (every sixteenth character rather than every 10th turns the odometer over).
Remember that the actual *value* of the number is the same whatever form it is displayed
in. In other words, what you are trying to do is to take a number and represent it as a
string in different formats - the same way you can take a LONG and display it as different
date formats.
If you have a string to place the result into you could work on the following basis:
keep looping until your number -1 = 0, your number being the one you want to
convert
Increment the rightmost character by one i.e. 0 1 2 3 4 5 6 7 8 9 A B C D E F, testing to
see if 'F' has been reached.
If it has been reached set it back to 0 and increment the next character on
the left by 1, first testing to see if 'F' has been reached. If it has been reached, set
it to 0 you move a further character to the left, repeating the process until you reach
the start of the string or the current character is less than 'F'
This is a simple counter, and if you display it between increments it will
show a speedometer type counter.
Once you realise how this works, you can short-circuit it by using division
and modulus. By having a string of 16 characters e.g. Hexchars = '0123456789ABCDEF'
you can select the value by using string slicing
Hexchars STRING(16)
hexdisplaystring STRING(30) ! Can handle up to 30 characters - use a
different length if you need to
stringposition SHORT ! will point to the character you are handling
number LONG ! holds the value you want to convert - prime this before
using...
tempnumber LONG ! use this for working so number is not affected
CODE
Hexchars = '0123456789ABCDEF'
clear(hexdisplaystring)
stringposition = len(hexdisplaystring)
tempnumber = number
LOOP WHILE (tempnumber AND stringposition) ! if you run out of number or
space this will end the loop
hexdisplaystring[stringposition] = hexchars[tempnumber%16 + 1] !
fetch hex char
tempnumber = tempnumber/16 ! the rightmost char is finished with so
adjust
the value - dividing a long loses the remainder (or modulus, depending
on
how old you are)
stringposition -= 1 ! next char
!note: either stringposition will become 0 or tempnumber will become 0
! you can test for overflow here if you want to e.g
! if not stringposition AND tempnumber - i.e. you still have a value to
evaluate but no space
!Message ('The number is too large for the string')
! hexdisplaystring = 'Overflow' ! or '' or whatever you want to do
END
Here it is without comments, (and tested....)
! NOTE: you can create the hexchars variable in the Data of the
procedure,
setting initial value to 0123456789ABCDEF
clear(hexdisplaystring)
stringposition = len(hexdisplaystring)
tempnumber = number
LOOP WHILE (tempnumber AND stringposition)
hexdisplaystring[stringposition] = hexchars[tempnumber%16 + 1]
tempnumber = tempnumber/16
stringposition -= 1 ! next char
if stringposition = 0 and tempnumber
message('Overflow')
end
END
2. Hex to decimal
This is much easier because it just consists of adding up the values
of each character of the hex string. Thus:
hexstring string(30)
number (long) ! where you will store the number
stringposition LONG
counter LONG
tempnumber LONG
! you would first prime the hexstring with a hexadecimal string
CODE
number = 0 ! start with nothing
stringposition = len(clip(hexstring))
tempnumber = 0
counter = 0
LOOP WHILE (stringposition ) ! stop when you have evaluated the
whole string
if not counter ! i.e. the first time through
counter = 1
else
counter = counter * 16 ! 16 256 4096 65536 etc
end
CASE hexdisplaystring[stringposition]
OF '0' to '9'
number += counter * hexdisplaystring[stringposition]
ELSE
number += counter * (10 + (
VAL(hexdisplaystring[stringposition]) - VAL('A') ) )
! this puts 'A' to 10, 'B' to 11 and so on - make sure that the string
entered is UPPER or amend this code to change to UPPER
END
tempnumber += 1
stringposition -= 1
END
This also has been tested.
Most of the time solving this sort of problem is very difficult if you
don't
know what you are trying to accomplish. I think Russell Egan has often
said
(something like) when you have a problem and there is any part of it you
don't understand, go back a step until you understand that part.
Arnor Baldvinson notes that there is a sample app shipping with Clarion showing how
to do hex-decimal conversions.
Today is November 23, 2024, 2:13 am This article has been viewed 35261 times.
|
|